FLOWX E-mail sales@flowxvalve.com

FLOWX Engineer 86-21-54150349

News

Home >> News >> Industry dynamics >> The Essential Characteristics of Pneumatic Actuators

The Essential Characteristics of Pneumatic Actuators

Source:http://www.flowxgroup.com/Update Time:2014-06-24Hits:

The effects of pneumatic electric actuators and handwheel rural market controllers in a closed loop system have been improved as time goes by in the design and simulation modeling which confirm that the proposed pneumatic actuators and handwheel rural market can achieve variable motions. At the same time, we can maintain the essential characteristics of pneumatic actuators and handwheel rural market valve in an easy manner with a relatively simple and accurate model that has been developed for control development and evaluation with the identified parameters to reduce the valve landing velocity in agreement with the optimal criteria in the pneumatic actuators and handwheel rural market while the armature geometry can be used to minimize the power consumption.

The reality of the design area in the pneumatic actuators and handwheel rural market in terms of mechanic systems demands the feature of keeping constant advances in development and improvement of structures as well as accurate analysis that is more representative and rigorous. Therefore, we need to point out the evident importance of determining dynamics properties in the pneumatic actuators and handwheel rural market such as natural frequencies and vibration mode shapes. On the other hand, to proceed with such kind of analysis, an external excitation force must be applied to the structure in the pneumatic actuators and handwheel rural market, which can be obtained from exciters or shakers in the application of the mechanical connection between the device in spite of the fact that the pneumatic actuators and handwheel rural market structure that is marked by flexible stick.

As a matter of fact, once the pneumatic actuators and handwheel rural market connection is done, the exciter can be controlled by a signal generator that is capable of introducing different signals and characteristics to the structure via the connection between the pneumatic actuators and handwheel rural market exciter and structures with the help of parameters of expressive importance to the quality of results.

In some pneumatic actuators and handwheel rural market, there is a lack in the experimental part without any doubt about the rotating machinery, which is precisely the application of the external force without contact so as to minimize the noise problem in high rotational speeds. The noise of the pneumatic actuators and handwheel rural market occurs in part due to the bearing friction, which can be noticed in a range of applications. In this context, the pneumatic actuators and handwheel rural market appears as a possible proposal to solve this question as long as the main focus is to enable the external excitation to get rid of any kind of mechanical contact with the forces that are generated by permanent magnets in engineering.

Featured Products: FP series limit switch | FP series pneumatic actuator

Customer Hotline:
021-54150349