FLOWX E-mail sales@flowxvalve.com

FLOWX Engineer 86-21-54150349

News

Home >> News >> Industry dynamics >> How to Repair Water Filter Housing in a Frigidaire Refrigerator

How to Repair Water Filter Housing in a Frigidaire Refrigerator

Source:http://www.flowxgroup.com/Update Time:2014-04-18Hits:

We should know how to repair filter, especially water filter, and one thing we shouldn’t ignore is the electric actuators. General Motors bought the Guardian Frigates Company in 1918 and renamed it Frigidaire, and then the company became a famous manufacturer of refrigerators and other appliances. Now possessed by Electrolux, most of Frigidaire models are reliable, but problems can develop that need your attention. Once the water filter housing gets broken within the fridge, you will require repairing it to prevent leaks immediately. Now grasping some necessary knowledge about how to repair filter is becoming so vital. While epoxy might seal a crack temporary, we’d better to replace the housing outright to prevent problems in the future. However, we need one thing like electric actuators that is necessary to repair the filter, and apart from it, we need other two things like 1/4-inch nut driver, and flat-head screwdriver.

Then I’ll list some necessary constructions about how to repair filter, especially water filter.

Firstly, it is the first step we should pay particular attention to, which can lead the different effect about how to repair filter. We require unplugging the Frigidaire refrigerator so there is no difficulty of electrical actuator when we try to find some ways how to repair filter.

Secondly, we should empty out the top shelf of the fridge, which is beneficial for us to make some reference about how to repair filter. After that, we can pull the top shelf out so the panel is available in the back, through this we can gain more understanding about how to repair filter and improve our skills.

Fourthly, we should insert a quarter-inch nut driver in the access hole in the upper right corner of the fridge to undo the bolt that holds the access panel in place. After doing this, we can pull the cover off once it comes loose and set it aside, and then you’ll see the filter housing in the back corner if the cover has been moved. This step can help us know more about how to repair filter and then correct our mistakes.

Fifthly, we need to tie the filter housing from the back wall through utilizing the quarter-inch nut driver to deal with the bolts, and then in order to make you have easier access to the woe water lines related at the top, we can pull out the housing, and this is the vital way about how to repair filter.

Sixthly, we can disturb the clips holding the two water lines to the filter regulators by pushing up on them with a flat-head screwdriver, which can help us know how to repair filter or any other king of filter.

Seventhly, we can press the two water lines down onto the new housing, and then screw the housing in place in the back corner.

Finally, we can screw the cover on the filter housing, and then replace the top shelf and put the food back in the fridge. After that, we need to plug the Frigidaire back in and then we can gain a much more perfect understanding about how to repair filter. For all of us, the specific way can helps us a lot about how to repair filter.

If your refrigerator is matched with an ice maker and/or water dispenser, it also comes with a water filter to clean the water coming into the fridge. Moreover, some of these filters are covered in a plastic container in order to protect the goods in the containers, and then it’s possible for this container to become broken or damaged, so you can constitute the filter setting on your own. After learning this, we can not only improve our skills to deal with the filter but also know more about how to repair filter when necessary.

Featured Products: Full lined butterfly valve | pneumatic actuators

Customer Hotline:
021-54150349